Видео

If you're on the lower strings does it actually take more turns, /longer turns to get to the same note as if you were on a standard set of tuners? Say you need to go from low e to drop D, do you have to turn this gear more or less times compared to a regular tuner?

THANKS BUDDY!!!!!!!!🤘💯

they don't give all speaker or different speaker each speaker different watts same with amplifier they don't give all model because made in there country to run on there stuff not on other country amplifier why not listed on there

i done test nosie on tweeter test roby as hell different is if one device low other mid

Nice

Try get move loudness with out peaking

Wow, just solved my 3.71 update!! imagine that, an old printer cable was the solution!!

Chris, I remember you, do you remember me?

Awesome

I have noticed a number of electric mower owners only make half a mower cut at a time. Taking about twice as long to cut their lawn.

Thanks buddy kool

Are there any other guitars with a Floyd rose and a 24.75 scale length?

This song has the same impact on me now, as it did when it was released.

🤑

Can't see what you are doing from you chubby fingers!!!

Spent days trying to figure this out and as soon as I tried the problem got solved! Thank you!!

According to Prs support , Adjust the claw screws about 1/4 turn at a time until the bridge floats parallel to the strings and about 1/16th off the body , that 1,6 mm.

hello, I want to ask friends here. Why does my Line 6 Helix LT experience intermittent sound (no sound even comes out) when the effect is first turned on? However, after 10 minutes the sound returned to normal. does anyone know?

Wow! I have so many gigs this weekend and was afraid I screwed myself trying to update tonight...Using an old USB cable did the trick. Thanks for posting this.

Many thanks This video was very helpful

The bridge is too high… prs spec is 1/16 and level…… in mm it’s approximately 1.6mm.. i do appreciate the video though.

I paid $699 from Sweetwater new back in 2018. I got the wine red color. I’ve been gigging with it since and still sounds and plays great for five years now.

suck

My dishwasher started beeping and the light blinking for what seemed like no reason whatsoever. I was pushing every button I could, and I couldn’t find the plug to unplug it, but I actually did think of that, amazingly so. Went online to RUclips found this then I knew I was in the right direction. Thank you!I went to the electrical box and there was a fuse that said dishwasher. I flipped that. In a few minutes, I guess I’ll try putting it back on. But I bet it works.

Awesome Job Guys!!! Keep On Rockin!!! 🤘😎🤘 The whole night was a huge success!! John was there with us all!! 💖💖💖 Sheila

I have a Kiesel guitar with this trem system. My whammy bar isn't precision tight and wiggles around. Do you know if there is some way to tighten an internal plastic collar / set-screw like on the Gotoh 510 or Ibanez Edge trem systems, to get the whammy bar to be nice and snug so it doesn't wiggle around?

Thanks again brother from South Africa

Thanks for helping

great review. I just got this mower & blower. had the weed eater already which is why I stayed with the 40v platform. mower, weed eater and also snow shovel for my deck. my back yard is smaller than yours so should be good to go 2 cuts on one charge!

Intente hacerlo por mi mismo, al no lograrlo la lleve a una “lauderia profesional” y tampoco lo consiguieron y solo terminaron arruinando el acabado de mi hermosa guitarra…

of course ur not gonna like a 175 guitar.

I appreciate you taking the time to make this. Decided to try my hand at doing my own setup and this specific point was something I couldn't find elsewhere. I'm having an issue though, I can't get the action where I want it with these screws set to this height. What could I be doing wrong?

You've just made up my mind to get one. Great video

Help me , how to reset factory line6 spider iv 15 , please. Thanks man

you had me at "...that's what she said" 🤣

Grrreeaat video. Im a lil slow at reading ssshh this video was the best at explaining this. THANK YOU

awesome. great job. looking forward to trying this

Yup E and G your me! After bends mainly

You'd probably find a problem with a bag of ice and return it lol

What are impulseresponses I dont have a helix yet but I am getting one

hello Chris, i hope u doing well , thank u for the informations u give . i have the same issues as u in my ring finger . Is yr finger sagittal band come back like before without surgery ? or do u still feel incomftable sometimes ?

Wow! Thanks for the advice!! I was able to make work! Thanks!!

Hi There - Nice Demo! I don't have an 'A' button for the Spider III ??

Thank you you just saved me money for repair man and probably latch assembly and circuit board im sure

If you need to adjust the screws on your PRS trem this is how you do it.Using a 2 1/2 mm allen wrench as a feeler gauge (the flat side) it should be a slight drag,I've found it's best to tighten down and then loosen, to find the correct height and get the screws exactly even with each other. Don't forget to remove strings(put a piece of cardboard under the rear of the bridge),and trem springs before you adjust and when finished (springs and strings back in place and in tune) the bridge should be about 1 1/2 mm floating off the body front and back.Good job...

Why no footage of actual movement of the tuners, tuning up, tuning down, to drop d for instance. Show us how well, how easily they manage this necessary fuction.

Will this work on my spider Iv 30 line 6

Slightly lower model, had issue with 3 beeps wouldn't start. Before that I had issue where power would go out and control panel wouldn't respond preceeded by it beeping randomly. I would remove power and then it work again for a while then quit again. Eventually that quit working. In my case the door switch seemed to check out okay. Other videos said replace the main board. I replaced all the electrolytic caps on the main board, that changed nothing. I replaced the 3 electrolytic caps on the control panel board and now the dishwasher seems to work fine. 3 weeks since replacing the capacitors. My friend used an ESR tester on the 3 capacitors that I replaced and said they seem to still check out fine but machine has been solid since. YMMV.

What version did you purchase? The v3?

Next time try a 1/4 inch drive deep socket to press out the ferrules.